Korg Pa4X User Manual page 651

St. Env. Tremolo (Stereo Envelope Tremolo)
This effect uses the input signal level to modulate a stereo tremolo (LFO
volume modulation). For instance, you can create a tremolo effect that be-
comes deeper and faster as the input gets more quiet.
Stereo In - Stereo Out
Left
Right
LFO: Tri/Sin/Vintage
+
Envelope
a Envelope Sens
Envelope Shape
b LFO Waveform
LFO Shape
c LFO Phase [de-
gree]
d LFO Frequency
[Hz]
Envelope Amount
[Hz]
e Depth
Envelope Amount
f Wet/Dry
Src
Amt
Tremolo
Tremolo
LFO Phase
LFO Shape
Envelope Shape
Envelope Sens
0...100 Sets the envelope's sensitivity to the input
signal
–100...+100 Sets the envelope's curvature
Triangle, Sine, Selects the LFO Waveform
Vintage
–100...+100 Changes
Waveform
–180...+180 Sets the LFO phase difference between the
left and right
0.02...20.00 Sets the speed of the LFO
–20.00... Sets the amount added to or subtracted
+20.00 from the Frequency when the envelope is
at maximum
0...100 Sets the initial amount of tremolo
–100...+100 Sets the amount added to or subtracted
from the Depth when the envelope is at
maximum
Dry, 1:99...99:1, Balance between the wet and dry signal
Wet
Off...Tempo See DMS (Dynamic Modulation Source)
–100...+100 Amount of modulation source
Effect parameters |637
FX Amt
FX Amt
the curvature of the LFO