Korg Pa4X User Manual page 1111

Problem
The selected Style or Song
cannot start
Does not respond to MIDI
messages
Percussive instruments are
not played correctly
Some 'clicks' can be heard
when playing a percussive
instrument
A background noise can
be heard after selecting a
Keyboard Set or Style
Media related problems
Cannot format a device
Cannot save data to a device Is the device formatted?
Cannot load data from a
device
The message 'Over Current
Condition Detected on USB
port: please remove the
USB media' appears in the
display
Solution
Make sure that the Clock parameter is set to Internal. If you are
using the MIDI Clock of another device (like a sequencer), you
must set the MIDI Clock parameter to MIDI or USB, and make
sure that the external device transmits MIDI Clock data.
Make sure that the MIDI or USB cable is connected correctly.
Make sure that the external device is transmitting through MIDI
channels enabled to receive in Pa4X.
Make sure that the MIDI IN Filters do not prevent the reception
of messages.
Make sure that the Drum track is set to Drum Mode and the
external device has not transposition applied.
This is part of the sound, and not a problem.
The selected Keyboard Set or Style recalled the effect 'St.
Analog Record', simulating the noise of a old vinyl recording.
Is the USB cable correctly connected?
Is the USB device correctly powered?
Is the device inserted correctly?
Is the write protect tab of the disk or card in the protect posi-
tion? Unprotect it.
Is the device inserted correctly?
Is the write protect tab of the disk or card in the protect posi-
tion? Unprotect it.
Is the device inserted correctly?
Does the device contain data compatible with Pa4X?
The USB device is probably defective, due to a short circuit,
and cannot be used. While this will not damage Pa4X, it is ad-
visable to remove the device.
Troubleshooting |1097