Korg Pa4X User Manual page 847

Calibrating the pedal and setting its
polarity
If needed, you might have to calibrate the pedals to use their full range of
values, without any 'dead spot'. Also, this procedure allows to choose the
pedal's polarity.
Calibrate the pedal
1 Go to the Global > Controllers > Foot
2 Touch the Calibration
the Damper & Pedal/Footswitch Calibration
3 Fully press the pedal down, and while continuing to press touch the
button to confirm the maximum value.
4 When the following dialog appears, release the pedal.
page.
button in the area of the button to calibrate, to make
Foot controllers |833
dialog appear.
Push