Korg Pa4X User Manual page 427

Choosing a pitch modulation source
▪
Use the Pitch > AMS
modulation source for the pitch of the selected oscillator. A list of the avail-
able AMS sources is in the Appendix.
The Intensity
of the effect produced by the AMS. With a setting of 0, no modulation will be
applied. With a setting of 12.00, the pitch will change up to one octave.
For example, if you choose the JS (-Y) AMS and move the joystick down-
wards, the pitch will rise if this parameter is set to a positive (+) value, or fall
if this parameter is set to a negative (–) value. The range is a maximum of
one octave.
Controlling the Pitch EG (Envelope Generator)
Use the Pitch EG
tors.
Linking pitch to the envelope
▪
The Velocity Intensity
direction of the Pitch EG modulation. With a setting of 12.00, the pitch will
change a maximum of ±1 octave.
Linking pitch to an AMS modulation
▪
Use the Pitch EG > AMS
pitch EG of the selected oscillator. A list of the available AMS sources is in
the Appendix.
▪
Use the Pitch EG > Intensity
the AMS. For example, if you choose the Velocity AMS and set this value to
+12.00, the velocity will control the range of pitch change produced by the
pitch EG in a range of ±1 octave. As you play more softly, the pitch change will
draw closer to the pitch EG levels.
(Alternate Modulation Source) pop-up menu to select a
parameter (-12.00...+12.00) specifies the depth and direction
parameters to controls the Pitch EG unique to all oscilla-
parameter (-12.00...+12.00) specifies the depth and
parameter to select a modulation source for the
parameter to specify the depth and direction of
Editing the Sounds |413