Installing/Mounting; Basic Safety Notes - Siemens SITRANS F Series Operating Instructions Manual

Ultrasonic flowmeters

Hide thumbs Also See for SITRANS F Series:

Table of Contents

Installing/mounting

5.1

Pressure applications

Danger to personnel, system and environment will result from improper disassembly.

• Never attempt to loosen, remove, or disassemble process connection while vessel contents

Wetted parts unsuitable for the process media

Risk of injury or damage to device.

Hot, toxic and corrosive media could be released if the wetted parts are unsuitable for the

process medium.

• Ensure that the material of the device parts wetted by the process medium is suitable for the

Note

Material compatibility

Siemens can provide you with support concerning selection of sensor components wetted by

process media. However, you are responsible for the selection of components. Siemens accepts

no liability for faults or failures resulting from incompatible materials.

Unsuitable connecting parts

Risk of injury or poisoning.

In case of improper mounting, hot, toxic, and corrosive process media could be released at the

connections.

• Ensure that connecting parts (such as flange gaskets and bolts) are suitable for connection

Sitrans fst090