Chapter
System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
show ntp source
To display information about the Network Time Protocol (NTP) source, use the show ntp source
command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Command History
Release
6.0(2)U(2)1
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the NTP source information:
switch(config)# show ntp source
Related Commands
Command
ntp source
OL-29557-04
show ntp source
Modification
This command was introduced.
Description
Configures the NTP source.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
show ntp source
-SM-245