Chapter
System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
snmp-server tcp-session
To enable a one-time authentication for Simple Network Management Protocol (SNMP) over a TCP
session, use the snmp-server tcp-session command. To disable the one-time authentication, use the no
form of this command.
Syntax Description
auth
Command Default
Disabled
Command Modes
Global configuration mode
Command History
Release
5.0(3)U1(1)
Examples
This example shows how to enable one-time authentication for SNMP over a TCP session:
switch# configure terminal
switch(config)# snmp-server tcp-session auth
switch(config)#
This example shows how to disable one-time authentication for SNMP over a TCP session:
switch# configure terminal
switch(config)# no snmp-server tcp-session auth
switch(config)#
Related Commands
Command
show snmp
OL-29557-04
snmp-server tcp-session [auth]
no snmp-server tcp-session [auth]
(Optional) Specifies that one-time authentication for SNMP be enabled over
the TCP session.
Modification
This command was introduced.
Description
Displays the SNMP status.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
snmp-server tcp-session
-SM-315