Snmp-Server Location - Cisco nexus 3000 series Command Reference Manual

snmp-server location

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
snmp-server location
To set the Simple Network Management Protocol (SNMP) system location string, use the snmp-server
location command. To remove the location string, use the no form of this command.
Syntax Description
text
Command Default No system location string is set.
Command Modes Global configuration mode
Command History Release
5.0(3)U1(1)
Examples This example shows how to set a system location string:
switch# configure terminal
switch(config)# snmp-server location Building 3/Room 21
switch(config)#
This example shows how to remove the system location string:
switch# configure terminal
switch(config)# no snmp-server location Building 3/Room 21
switch(config)#
Related Commands Command
snmp-server contact
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-312
snmp-server location [text]
no snmp-server location [text]
(Optional) String that describes the system location information.
Modification
This command was introduced.
Description
Sets the SNMP system contact (sysContact) string.
Chapter System Management Commands
OL-29557-04