Cisco nexus 3000 series Command Reference Manual page 44

callhome
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
callhome
To configure the Cisco Smart Call Home service and enter the callhome configuration mode, use the
callhome command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration mode
Command History Release
5.0(3)U1(1)
Usage Guidelines
You must configure the e-mail, phone, and street address information for Call Home. You can optionally
configure the contract ID, customer ID, site ID, and switch priority information.
Examples
This example shows how to enter callhome configuration mode:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)#
Related Commands Command
email-contact
show callhome
snmp-server contact
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-20
callhome
Modification
This command was introduced.
Description
Configures the e-mail address.
Displays a summary of the Call Home configuration.
Configures the SNMP contact (sysContact).
Chapter System Management Commands
OL-29557-04