Chapter
System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
clear mpls strip label dynamic
To clear dynamic label entries from the MPLS label table, use the clear mpls strip label dynamic
command.
Syntax Description
This command has no arguments or keywords
Command Default
None
Command Modes
EXEC mode
Command History
Release
6.0(2)U2(5)
Examples
This example shows how to clear dynamic label entries:
switch(config)# sh mpls strip labels
MPLS Strip Labels:
Legend:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
450000
switch(config)# clear mpls strip labels dynamic
switch(config)# sh mpls strip labels
MPLS Strip Labels:
OL-29557-04
clear mpls strip label dynamic
Modification
This command was introduced.
Total
: 2
Static
: 0
* - Static Label
Interface - where label was first learned
Idle-Age
- Seconds since last use
SW-Counter- Packets received in Software
HW-Counter- Packets switched in Hardware
Label
Interface
Eth1/47
45000
Eth1/47
Idle-Age
SW-Counter
1
2
1
1
Cisco Nexus 3000 Series NX-OS System Management Command Reference
clear mpls strip label dynamic
HW-Counter
0
0
-SM-29