Shut (Erspan) - Cisco nexus 3000 series Command Reference Manual

shut (ERSPAN)

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
shut (ERSPAN)
To shut down an Encapsulated Remote Switched Port Analyzer (ERSPAN) session, use the shut
command. To enable an ERSPAN session, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default None
Command Modes ERSPAN session configuration mode
Command History Release
5.0(3)U2(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to shut down an ERSPAN session:
switch# configure terminal
switch(config)# monitor session 1 type erspan-source
switch(config-erspan-src)# shut
switch(config-erspan-src)#
This example shows how to enable an ERSPAN session:
switch# configure terminal
switch(config)# monitor session 1 type erspan-source
switch(config-erspan-src)# no shut
switch(config-erspan-src)#
Related Commands Command
monitor session
show monitor session
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-296
shut
no shut
Modification
This command was introduced.
Description
Enters the monitor configuration mode.
Displays the virtual SPAN or ERSPAN configuration.
Chapter System Management Commands
OL-29557-04