Contract-Id (Call Home) - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

contract-id (Call Home)

To configure the optional contract number for the customer, use the contract-id command. To remove a
contract number, use the no form of this command.
Syntax Description
contract-number
Command Default
None
Command Modes Callhome configuration mode
Command History Release
5.0(3)U1(1)
Usage Guidelines You can configure the customer identification information that Cisco Smart Call Home should use. The
service agreement includes the customer identification information, such as the customer ID, contract
ID, and site ID.
Examples
This example shows how to configure the contract number for the customer:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# contract-id 12095134-1706
switch(config-callhome)#
Related Commands Command
customer-id
show callhome
OL-29557-04
contract-id contract-number
no contract-id
Contract number. The contract number can be up to 255 alphanumeric
characters in free format.
Modification
This command was introduced.
Description
Configures the customer number for the switch.
Displays a summary of the Call Home configuration.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
contract-id (Call Home)
-SM-39