Show Ntp Source-Interface - Cisco nexus 3000 series Command Reference Manual

show ntp source-interface

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
show ntp source-interface
To display the Network Time Protocol (NTP) source interface, use the show ntp source-interface
command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Command History Release
6.0(2)U(2)1
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the NTP source interface:
switch(config)# show ntp source-interface
Source interface
switch(config)#
Related Commands Command
show startup-config
ntp
show running-config
ntp
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-246
show ntp source-interface
Modification
This command was introduced.
loopback1
Description
Displays information about the startup NTP configuration of the switch.
Displays information about the NTP configuration that is currently running
on the switch.
Chapter System Management Commands
OL-29557-04