Monitor Erspan Origin Ip-Address - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

monitor erspan origin ip-address

To configure the Encapsulated Remote Switched Port Analyzer (ERSPAN) global origin IP address, use
the monitor espan origin ip-address command. To remove the ERSPAN global origin IP address
configuration, use the no form of this command.
Syntax Description
ip-address
global
Command Default None
Command Modes Global configuration mode
Command History Release
5.0(3)U2(2)
Usage Guidelines When you change the origin IP address, it impacts all the sessions.
On a Cisco Nexus 3000 Series switch, only global origin IP address is supported.
Note
This command does not require a license.
Examples
This example shows how to configure the ERSPAN global origin IP address:
switch# configure terminal
switch(config)# monitor erspan origin ip-address 10.1.1.1 global
switch(config)#
This example shows how to remove the ERSPAN global origin IP address:
switch# configure terminal
switch(config)# no monitor erspan origin ip-address 10.1.1.1 global
switch(config)#
Related Commands Command
monitor session
OL-29557-04
monitor erspan origin ip-address ip-address [global]
no monitor erspan origin ip-address ip-address [global]
IP address.
(Optional) Specifies the default global configuration.
Modification
This command was introduced.
Description
Configures a SPAN or an ERSPAN session.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
monitor erspan origin ip-address
-SM-119