Event Manager Applet - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

event manager applet

To register an applet with the Embedded Event Manager (EEM) and enter the applet configuration mode,
use the event manager applet command. To remove the applet configuration, use the no form of this
command.
Syntax Descriptiona
applet-name
Defaults
None
Command Modes
Applet configuration mode
Command History Release
5.0(3)U3(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to register an applet and enter the applet configuration mode:
switch# configure terminal
switch(config)# event manager applet monitorShutdown
switch(config-applet)#
This example shows how to remove the applet configuration:
switch(config-applet)# no event manager applet monitorShutdown
switch(config-applet)#
Related Commands Command
description
event
show event-manager
policy state
tag
OL-29557-04
event manager applet applet-name
no event manager applet applet-name
Name of the applet. The applet name can be any case-sensitive,
alphanumeric string up to 29 characters. The applet name cannot have an
underscore in the first two characters.
Modification
This command was introduced.
Description
Configures a descriptive string for the policy.
Configures the event statement for the policy.
Correlates multiple events in the policy.
Displays information about the status of the configured policy.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
event manager applet
-SM-59