Sflow Sampling-Rate - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

sflow sampling-rate

To configure the sFlow sample rate for packets, use the sflow sampling-rate command. To remove the
sample rate, use the no form of this command.
Syntax Description
sampling-rate
Defaults
None
Command Modes Global configuration
Release
Command History
5.0(3)U4(1)
Usage Guidelines A sampling-rate of 0 disables sampling.
This command does not require a license.
Examples
This example shows how to set the sampling rate to 50,000.
switch# configure terminal
switch(config)# sflow sampling-rate 50000
switch(config)# copy running-config startup-config
Related Commands Command
feature sflow
show sflow
OL-29557-04
sflow sampling-rate sampling-rate
no sflow max-sampling-rate sampling-rate
sFlow sampling rate for packets. The sampling-rate can be an integer
between 4096 and 1000000000. The default value is 4096.
Modification
This command was introduced.
Description
Enables sFlow.
Displays sFlow information.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
sflow sampling-rate
-SM-187