Ntp Master - Cisco nexus 3000 series Command Reference Manual

ntp master

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
ntp master
To configure the device to act as an authoritative Network Time Protocol (NTP) server, use the ntp
master command. To remove the device as an authoritative NTP server, use the no form of this
command.
Syntax Description
stratum
Defaults
None
Command Modes Global configuration mode
Command History Release
6.0(2)U(2)1
Usage Guidelines This command enables the device to distribute time even when it is not synchronized to an existing time
server.
This command does not require a license.
Examples This example shows how to configure the device to act as an authoritative NTP server:
switch# configure terminal
switch(config)# feature ntp
switch(config)# ntp master 5
This example shows how to remove a device as an authoritative NTP server:
switch# configure terminal
switch(config)# no ntp master 5
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-142
ntp master [stratum]
no ntp master [stratum]
(Optional) Stratum number. The range is from 1 to 15.
Modification
This command was introduced.
Chapter System Management Commands
OL-29557-04