Phone-Contact (Call Home) - Cisco nexus 3000 series Command Reference Manual

phone-contact (Call Home)

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
phone-contact (Call Home)
To configure the phone number for the primary person responsible for the device, use the phone-contact
command. To remove a phone contact, use the no form of this command.
Syntax Description
phone-no
Command Default
None
Command Modes Callhome configuration mode
Command History Release
5.0(3)U1(1)
Examples
This example shows how to configure a phone number for the primary person responsible for the device:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# phone-contact +1-800-123-4567
switch(config-callhome)#
Related Commands Command
copy running-config
startup-config
show callhome
streetaddress
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-156
phone-contact phone-no
no phone-contact
Phone number in international phone number format, such as
+1-800-123-4567. The phone number can be a maximum of 17
alphanumeric characters and cannot contain spaces.
Note
Modification
This command was introduced.
Description
Saves this configuration change.
Displays a summary of the Call Home configuration.
Configures the street address for the primary person responsible for the
switch.
You must use the + prefix before the number.
Chapter System Management Commands
OL-29557-04