Event Manager Policy - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

event manager policy

To register and activate an Embedded Event Manager (EEM) script policy, use the event manager policy
command. To remove the event manager policy, use the no form of this command.
Syntax Description
policy-script-file
Defaults
None
Command Modes Global configuration mode
Command History Release
5.0(3)U3(1)
Usage Guidelines Before using the event manager policy command, define a policy by using the virtual shell (VSH) script
and copy the file to the system directory. For information on how to define a policy, see the Cisco Nexus
3000 Series NX-OS System Management Configuration Guide.
This command does not require a license.
Examples
This example shows how to register and activate an EEM script policy:
switch# configure terminal
switch(config)# event manager policy modulescript
switch(config)#
OL-29557-04
event manager policy policy-script-file
no event track event manager policy script-policy-file
Name of the script policy file. The policy scriptfile name can be any
case-sensitive, alphanumeric string up to 29 characters.
Modification
This command was introduced.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
event manager policy
-SM-61