Show Startup-Config Eem - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

show startup-config eem

To display information about the startup configuration for the Embedded Event Manager (EEM), use the
show startup-config eem command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Command History Release
5.0(3)U3(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display information about the startup configuration for EEM:
switch# show startup-config eem
!Command: show startup-config eem
!Time: Thu Feb 23 02:05:51 2012
!Startup config saved at: Wed Feb 22 20:55:47 2012
version 5.0(3)U5(1)
switch#
Related Commands Command
show event manager
environment
show event manager
event-types
show event manager
history events
show event manager
policy-state
show event manager
script system
OL-29557-04
show startup-config eem
Modification
This command was introduced.
Description
Displays information about the configured environment variables.
Displays information about the event manager event types.
Displays the history of events for all policies.
Displays information about a system policy.
Displays information about the script policies.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
show startup-config eem
-SM-289