Show Ptp Time-Property - Cisco nexus 3000 series Command Reference Manual

show ptp time-property

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
show ptp time-property
To display the Precision Time Protocol (PTP) clock properties, use the show ptp time-property
command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History Release
5.0(3)U2(2)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the PTP clock properties:
switch# show ptp time-property
PTP CLOCK TIME PROPERTY:
switch#
Related Commands Command
show ptp brief
show ptp clock
show ptp clock
foreign-masters-record
show ptp corrections
show ptp parent
show ptp port
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-260
show ptp time-property
Modification
This command was introduced.
Current UTC Offset valid: 0
Current UTC Offset: 0
Leap59: 0
Leap61: 0
Time Traceable: 0
Frequency Traceable: 0
PTP Timescale: 0
Time Source: 0xa0(Internal Oscillator)
Description
Displays the PTP status.
Displays the properties of the local clock.
Displays the state of foreign masters known to the PTP process.
Displays the last few PTP corrections.
Displays the properties of the PTP parent.
Displays the status of the PTP port.
Chapter System Management Commands
OL-29557-04