Hardware Profile Buffer Info Port-Threshold - Cisco nexus 3000 series Command Reference Manual

hardware profile buffer info port-threshold

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
hardware profile buffer info port-threshold
To configure the port buffer information threshold so that a syslog message is generated when the buffer
capacity reaches the specified percentage, use the hardware profile buffer info port-threshold
command. The no form of this command is not supported.
Syntax Description front-port
port-number
threshold
percentage
Defaults
The port buffer information threshold is 90 percent.
Command Modes Global configuration mode
Command History Release
5.0(3)U3(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to set the port buffer information threshold to 80 percent for port 1:
switch# configure terminal
switch(config)# hardware profile buffer info port-threshold front-port 1 threshold 80
switch(config)#
Related Commands Command
copy running-config
startup config
show running-config
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-82
hardware profile buffer info port-threshold front-port port-number threshold percentage
Specifies to configure a front port.
Number of the port. The range is from 1 to 64.
Specifies to configure the threshold.
Percentage of buffer capacity. The range is from 1 to 95. The default value is 90
percent.
Modification
This command was introduced.
Description
Copies the running configuration to the startup-configuration file.
Displays the information for the running configuration.
Chapter System Management Commands
OL-29557-04