Chapter
System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
sflow collector-port
To configure a destination port for the sFlow datagram, use the sflow collector-port command. To
remove the destination port, use the no form of this command.
Syntax Description
collector-port
Defaults
None
Command Modes
Global configuration
Release
Command History
5.0(3)U4(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure the destination port for the sFlow datagrams.
switch# configure terminal
switch(config)# sflow collector-port 7000
switch(config)# copy running-config startup-config
[########################################] 100%
switch(config)#
Related Commands
Command
feature sflow
show sflow
OL-29557-04
sflow collector-port collector-port
no sflow collector-port collector-port
UDP port of the sFlow analyzer. The range for the collector-port is from
0 to 65535. The default value is 6343.
Modification
This command was introduced.
Description
Enables sFlow.
Displays sFlow information.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
sflow collector-port
-SM-181