Show Running-Config Monitor - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

show running-config monitor

To display the running configuration for the Switched Port Analyzer (SPAN) or Encapsulated Remote
Switched Port Analyzer (ERSPAN) session, use the show running-config monitor command.
Syntax Description all
Command Default
None
Command Modes
EXEC mode
Command History Release
5.0(3)U1(1)
5.0(3)U2(2)
Examples
This example shows how to display information on the running SPAN and ERSPAN configuration:
switch# show running-config monitor
!Command: show running-config monitor
!Time: Wed Sep 28 19:11:41 2011
version 5.0(3)U2(2)
monitor session 1 type erspan-source
description ERSPAN source session
vrf default
destination ip 192.0.2.1
ip ttl 5
ip dscp 3
source interface Ethernet1/5 both
mtu 1000
no shut
monitor session 3 type erspan-destination
description ERSPAN destination session
source ip 192.0.1.1
destination interface Ethernet1/2
switch#
This example shows how to display detailed information on the running SPAN and ERSPAN
configuration:
switch# show running-config monitor all
OL-29557-04
show running-config monitor [all]
(Optional) Displays current SPAN configuration information including
default settings.
Modification
This command was introduced.
Support for ERSPAN was added.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
show running-config monitor
-SM-271