Sflow Collector-Ip - Cisco nexus 3000 series Command Reference Manual

sflow collector-ip

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
sflow collector-ip
To configure the sFlow analyzer address, use the sflow collector-ip command. To remove the sFlow
analyzer address, use the no form of this command.
Syntax Description
ip-address
vrf-instance
Defaults None
Command Modes Global configuration
Release
Command History
5.0(3)U4(1)
Usage Guidelines
You must use the vrf-management option if the sFlow data collector is on the network connected to the
management port
You must use the vrf-default option if the sFlow data collector is on the network connected to the front
panel ports.
This command does not require a license.
Examples
This example shows how to configure the IPv4 address of the sFlow data collector that is connected to
the management port.
switch# configure terminal
switch(config)# sflow collector-ip 192.0.2.5 vrf-management
switch(config)# copy running-config startup-config
Related Commands Command
feature sflow
show sflow
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-180
sflow collector-ip ip-address vrf-instance
no sflow collector-ip ip-address vrf-instance
IPv4 address.
Specifies the virtual router context (VRF) instance. The VRF can be one
of the following:
Modification
This command was introduced.
• vrf-name—VRF name. The name can be any case-sensitive,
alphanumeric string up to 32 characters.
• vrf-default—Specifies the default VRF.
• vrf-management—Specifies the management VRF.
Description
Enables sFlow.
Displays sFlow information.
Chapter System Management Commands
OL-29557-04