Logging Ip Access-List Cache Interval Seconds - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

logging ip access-list cache interval seconds

Sets the number of seconds between log updates. Also if an entry is inactive for this duration, it is
removed from the cache. The range is from 5 to 86400 seconds. The default value is 300 seconds.
Syntax Description interval
Command Default
None
Command Modes Interface configuration mode
Command History Release
5.0(3)U1(1)
Examples
This example shows how to log interface events:
switch# configure terminal
switch(config)# logging ip access-list cache interval 120
switch(config)#
Related Commands Command
show logging
OL-29557-04
logging ip access-list cache interval <seconds>
The number of seconds between log updates.
Modification
This command was introduced.
Description
Displays the logging status.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
logging ip access-list cache interval seconds
-SM-105