Snmp-Server Enable Traps - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

snmp-server enable traps

To enable the Simple Network Management Protocol (SNMP) notifications, use the snmp-server enable
traps command. To disable SNMP notifications, use the no form of this command.
Syntax Description aaa
server-state-change
callhome
event-notify
smtp-send-fail
entity
entity_fan_status_change
entity_mib_change
entity_module_inserted
entity_module_removed
entity_module_status_change
entity_power_out_change
entity_power_status_change
entity_unrecognised_module
fcdomain
fcns
fcs
OL-29557-04
snmp-server enable traps [aaa [server-state-change] | callhome [event-notify | smtp-send-fail] |
entity {entity_fan_status_change | entity_mib_change | entity_module_inserted |
entity_module_removed | entity_module_status_change | entity_power_out_change |
entity_power_status_change | entity_unrecognised_module} | fcdomain | fcns | fcs | fctrace
| fspf | license [notify-license-expiry | notify-license-expiry-warning |
notify-licensefile-missing | notify-no-license-for-feature] | link | rf
[redundancy_framework] | rmon [fallingAlarm | hcFallingAlarm | hcRisingAlarm |
risingAlarm] | rscn | snmp [authentication] | storm-control [trap-rate val] | vsan | zone
[default-zone-behavior-change | merge-failure | merge-success | request-reject1 |
unsupp-mem]]
no snmp-server enable traps [aaa [server-state-change] | callhome [event-notify |
smtp-send-fail] | entity {entity_fan_status_change | entity_mib_change |
entity_module_inserted | entity_module_removed | entity_module_status_change |
entity_power_out_change | entity_power_status_change | entity_unrecognised_module} |
fcdomain | fcns | fcs | fctrace | fspf | license [notify-license-expiry |
notify-license-expiry-warning | notify-licensefile-missing | notify-no-license-for-feature] |
link | rf [redundancy_framework] | rmon [fallingAlarm | hcFallingAlarm | hcRisingAlarm
| risingAlarm] | rscn | snmp [authentication] | storm-control [trap-rate] | vsan | zone
[default-zone-behavior-change | merge-failure | merge-success | request-reject1 |
unsupp-mem]]
(Optional) Enables notifications for a AAA server state change.
(Optional) Specifies the AAA server state change.
(Optional) Enables Cisco Call Home notifications.
(Optional) Specifies the Cisco Call Home external event
notification.
(Optional) Specifies the SMTP message send fail notification.
(Optional) Enables notifications for a change in the module status,
fan status, or power status.
(Optional) Specifies the entity fan status change.
(Optional) Specifies the entity MIB change.
(Optional) Specifies the entity module inserted.
(Optional) Specifies the entity module removed.
(Optional) Specifies the entity module status change.
(Optional) Specifies the entity power out change.
(Optional) Specifies the entity power status change.
(Optional) Specifies the entity unrecognized module.
(Optional) Enables notifications for the Fibre Channel domain.
(Optional) Enables notifications for the name server.
(Optional) Enables notifications for the fabric configuration server.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
snmp-server enable traps
-SM-303