Show Ntp Status - Cisco nexus 3000 series Command Reference Manual

show ntp status

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
show ntp status
To display the Network Time Protocol (NTP) distribution status, use the show ntp status command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Any command mode
Command History Release
6.0(2)U(2)1
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the NTP distribution status:
switch(config)# show ntp status
Distribution : Disabled
Last operational state: No session
switch(config)#
Related Commands Command
show ntp source
show ntp peers
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-244
show ntp status
Modification
This command was introduced.
Description
Displays information about the NTP source.
Displays information about NTP peers.
Chapter System Management Commands
OL-29557-04