Event Manager Environment - Cisco nexus 3000 series Command Reference Manual

event manager environment

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
event manager environment
To configure an environment variable for Embedded Event Manager (EEM), use the event manager
environment command. To remove the environment variable, use the no form of this command.
Syntax Descriptiona
variable-name
variable-value
Defaults None
Command Modes Global configuration mode
Command History Release
5.0(3)U3(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure an event manager variable for EEM:
switch# configure terminal
switch(config)# event manager environment emailto "admin@abc.com"
switch(config)#
This example shows how to remove the event manager variable:
switch(config)# no event manager environment emailto "admin@abc.com"
switch(config)#
Related Commands Command
show event manager
environment
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-60
event manager environment variable-name variable-value
no event manager environment variable-name variable-value
Name of the environment variable. The variable name can be any
alphanumeric string up to 29 characters.
Value of the environment. The variable value can be any case-sensitive,
alphanumeric string up to 39 characters specified within quotes.
Modification
This command was introduced.
Description
Displays information about the configured environment variables.
Chapter System Management Commands
OL-29557-04