Chapter
System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
snmp-server globalEnforcePriv
To configure Simple Network Management Protocol (SNMP) message encryption for all users, use the
snmp-server globalEnforcePriv command. To remove the encryption, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Command Default
The SNMP agent accepts SNMPv3 messages without authentication and encryption.
Command Modes
Global configuration mode
Command History
Release
5.0(3)U1(1)
Examples
This example shows how to configure SNMP message encryption for all users:
switch# configure terminal
switch(config)# snmp-server globalEnforcePriv
switch(config)#
This example shows how to remove SNMP message encryption for all users:
switch# configure terminal
switch(config)# no snmp-server globalEnforcePriv
switch(config)#
Related Commands
Command
snmp-server user
show snmp sessions
OL-29557-04
snmp-server globalEnforcePriv
no snmp-server globalEnforcePriv
Modification
This command was introduced.
Description
Configures a new user to an SNMP group.
Displays the current SNMP sessions.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
snmp-server globalEnforcePriv
-SM-309