Ntp Logging - Cisco nexus 3000 series Command Reference Manual

ntp logging

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
ntp logging
To enable Network Time Protocol (NTP) logging, use the ntp logging command. To disable NTP
logging, use the no form of this command.
Syntax Description
This command has arguments or keywords.
Defaults Disabled
Command Modes Global configuration mode (config)
Command History Release
6.0(2)U(2)1
Usage Guidelines This command does not require a license.
Examples This example shows how to enable NTP logging:
switch# configure terminal
switch(config)# ntp logging
switch(config)#
This example shows how to disable NTP logging:
switch# configure terminal
switch(config)# no ntp logging
switch(config)#
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-140
ntp logging
no ntp logging
Modification
This command was introduced.
Chapter System Management Commands
OL-29557-04