Cisco nexus 3000 series Command Reference Manual page 54

clear mpls strip label dynamic
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
Legend:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
switch(config)#
Related Commands Command
mpls strip
mpls strip dest-mac
mpls strip label
mpls strip label-age
show mpls strip labels Displays MPLS label configuration.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-30
Total : 0
Static : 0
* - Static Label
Interface - where label was first learned
Idle-Age - Seconds since last use
SW-Counter- Packets received in Software
HW-Counter- Packets switched in Hardware
Label Interface
Description
Enables the MPLS stripping feature.
Configures the destination MAC address for stripped egress frames.
Adds or deletes static MPLS labels.
Configures MPLS label aging.
Idle-Age SW-Counter
Chapter System Management Commands
HW-Counter
OL-29557-04