Snmp-Server Enable Traps Vtp - Cisco nexus 3000 series Command Reference Manual

snmp-server enable traps vtp

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
snmp-server enable traps vtp
To enable the Simple Network Management Protocol (SNMP) notifications for a VLAN Trunking
Protocol (VTP) domain, use the snmp-server enable traps vtp command. To disable SNMP
notifications on a VTP domain, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes Global configuration mode
Command History Release
5.0(3)U1(1)
Usage Guidelines
The snmp-server enable traps command enables both traps and informs, depending on the configured
notification host receivers.
This command does not require a license.
Examples This example shows how to enable SNMP notifications on a VTP domain:
switch(config)# snmp-server enable traps vtp
switch(config)#
This example shows how to disable all SNMP notifications on a VTP domain:
switch(config)# no snmp-server enable traps vtp
switch(config)#
Related Commands Command
show snmp trap
show vtp status
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-308
snmp-server enable traps vtp
no snmp-server enable traps vtp
Modification
This command was introduced.
Description
Displays the SNMP notifications enabled or disabled.
Displays VTP information.
Chapter System Management Commands
OL-29557-04