Show Sflow - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

show sflow

To display information about the sFlow global configuration, use the show sflow command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Global command mode.
Release
Command History
5.0(3)U4(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to configure sFlow information:
switch(config)# feature sflow
switch(config)# sflow sampling-rate 5000
switch(config)# sflow max-sampled-size 200
switch(config)# sflow counter-poll-interval 100
switch(config)# sflow max-datagram-size 2000
switch(config)# sflow collector-ip 192.0.2. vrf management
switch(config)# sfow collector-port 7000
switch(config)# sflow agent-ip 192.0.2.3
switch(config)# sflow data-source interface ethernet 1/5
Related Commands Command
feature sflow
OL-29557-04
show sflow
Modification
This command was introduced.
Description
Enables sFlow.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
show sflow
-SM-277