Duplicate-Message Throttle (Call Home) - Cisco nexus 3000 series Command Reference Manual

duplicate-message throttle (Call Home)

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
duplicate-message throttle (Call Home)
To limit the number of duplicate messages received for the same event, use the duplicate-message
throttle command. To disable duplicate message throttling for Call Home, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes Callhome configuration mode
Command History Release
5.0(3)U1(1)
Usage Guidelines
By default, the switch limits the number of duplicate messages received for the same event. If the number
of duplicate messages sent exceeds 30 messages within a 2-hour time frame, then the switch discards
further messages for that alert type.
Examples
This example shows how to enable duplicate alert message throttling for Call Home:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# duplicate-message throttle
switch(config-callhome)#
Related Commands Command
copy running-config
startup-config
show callhome
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-50
duplicate-message throttle
no duplicate-message throttle
Modification
This command was introduced.
Description
Saves this configuration change.
Displays Call Home configuration information.
Chapter System Management Commands
OL-29557-04