Cisco nexus 3000 series Command Reference Manual page 192

ptp sync interval
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
Related Commands Command
feature ptp
ptp
ptp announce
ptp delay-request
minimum interval
ptp vlan
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-168
Description
Enables or disables PTP on the switch.
Enables or disables PTP on an interface.
Configures the interval between PTP announce messages on an interface
or the number of PTP intervals before a timeout occurs on an interface.
Configures the minimum interval allowed between PTP delay-request
messages when the port is in the master state.
Configures the PTP VLAN value on an interface.
Chapter System Management Commands
OL-29557-04