Feature Ntp - Cisco nexus 3000 series Command Reference Manual

feature ntp

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
feature ntp
To enable the Network Time Protocol (NTP), use the feature ntp command. To disable NTP, use the no
form of this command.
Syntax Description
This command does not have any arguments or keywords.
Defaults Enabled
Command Modes Global configuration mode
Command History Release
6.0(2)U(2)1
Usage Guidelines This command does not require a license.
Examples This example shows how to enable NTP:
switch# configure terminal
switch(config)# feature ntp
This example shows how to disable NTP:
switch# configure terminal
switch(config)# no feature ntp
Related Commands Command
ntp master
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-76
feature ntp
no feature ntp
Modification
This command was introduced.
Description
Configures the device to act as an authoritative NTP server.
Chapter System Management Commands
OL-29557-04