Show Ip Source Binding - Cisco 4500M Command Reference Manual

show ip source binding

show ip source binding
To display IP source bindings configured on the system, use the show ip source binding EXEC
command.
Syntax Description
ip-address
mac-address
dhcp-snooping
static
vlan vlan-id
interface interface-name
Defaults
Displays both static and DHCP snooping bindings.
Command Modes
Privileged EXEC
Command History Release
12.1(19)EW
Usage Guidelines
The optional parameters filter the display output result.
Examples
This example shows how to display the IP source bindings:
Switch# show ip source binding
MacAddress
------------------
00:00:00:0A:00:0B
Switch#
This example shows how to display the static IP binding entry of IP address 11.0.01:
Switch# show ip source binding 11.0.0.1 0000.000A.000B static vlan 10 interface Fa6/10
show ip source binding 11.0.0.1 0000.000A.000B static vlan 10 interface Fa6/10
MacAddress
------------------
00:00:00:0A:00:0B
Switch#
Related Commands
ip source binding
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-324
show ip source binding [ip-address] [mac-address] [dhcp-snooping | static] [vlan vlan-id ]
[interface interface-name]
Modification
This command was first introduced.
IpAddress
---------------
11.0.0.1
IpAddress
---------------
11.0.0.1
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
(Optional) Binding IP address.
(Optional) Binding MAC address.
(Optional) DHCP-snooping type binding.
(Optional) Statically configured binding.
(Optional) VLAN number.
(Optional) Binding interface.
Lease(sec) Type
---------- -------------
infinite static
Lease(sec) Type
---------- -------------
infinite static
VLAN Interface
---- --------------------
10 FastEthernet6/10
VLAN Interface
---- --------------------
10 FastEthernet6/10
78-16201-01