Table of Contents
Advertisement
1
From the BSG navigation pane, select Configuration, VPN, VPN Settings.
The VPN Global Settings pane appears.
2
From the Remote Identity Type list, select IPV4, FQDN, EMAIL, or KEYID.
3
In the Remote Identity Value list, type the value corresponding to the selected
Remote Identity Type.
4
In the PreShared Key field, type a string of text which is the key that VPN uses
to authenticate before receiving any other credentials.
5
Click Add.
Variable definitions
The following table describes the variables and values for configuring VPN global settings.
Variable
Remote Identity Type
Remote Identity Value
PreShared Key
Configuring users
Complete the following procedure for each remote user.
Procedure steps
Step
Action
1
From the BSG navigation pane, select Configuration, VPN, Users.
The Database for VPN Remote Users pane appears.
2
In the User Name field, type the user name.
3
In the Password field, type the password.
4
Click Apply.
End
Value
The user identity type that uniquely identifies the peer. Select one of the
following:
•
IPV4 - specifies the IP address
•
FQDN- specifies the fully qualified domain name (an unambiguous
domain name that denotes the position of the node in the DNS tree
hierarchy)
•
EMAIL - specifies the email of the peer
•
KEYID - specifies the string that uniquely identifies the peer
Type the value corresponding to the selected Remote Identity Type.
Type a string of text which is the key that VPN uses to authenticate
before receiving any other credentials.
End
VPN configuration
57
Configuration Guide
Advertisement
Table of Contents
