Wep Configuration Parameters - Nortel BSG8ew 1.0 Configuration Manual

106 LAN advanced configuration
Variable
Cipher Suite
PMK SA Lifetime

WEP configuration parameters

The following section describes the parameters for advanced configuration of the WEP located at
Configuration,
Prerequisites
• To configure WEP settings for an SSID, you must set the Authorization Type of the SSID to
Open or Shared (see
NN47928-500 NN47928-500
Value
Specifies the required pairwise cipher and is used for data encryption. It
consists of an organizationally unique identifier (OUI) (the first 3 octets)
and a cipher suite identifier (the last octet).
Select one of the following options:
• AES-CCMP
• TKIP
• WEP
• AES-CCMP-TKIP
• AES-CCMP-WEP
• TKIP-WEP
• AES-CCMP-TKIP-WEP.
This field is used in conjunction with the Authentication Type. If you select
WPA for Authentication Type, the BSG supports TKIP. If you select
WPA2, the BSG supports AES-COMP and TKIP.
Type the Pairwise Master Key (PMK) SA (Security Association) Lifetime
value.
This represents the maximum lifetime of a PMK in the PMK cache.
The valid range is 1 to 4294967295.
The default value is 43200.
tab.
LAN, Wireless, WEP
WLAN security configuration parameters (page
End
105)).