16
WAN configuration
Figure 1 Ethernet WAN configuration procedures
Configuring dynamic IP address assignment
Complete this procedure to configure the Ethernet WAN for dynamic IP address assignment.
Procedure steps
Step
1
2
3
4
5
6
7
NN47928-500
NN47928-500
Action
From the BSG navigation pane, select Configuration, WAN, Ethernet.
The WAN Configuration pane appears.
From the Interface list, select the required interface.
From the Encapsulation Mode list, select Ethernet.
From the MAC Cloning list, select Enable.
In the MAC Address field, type the MAC Address.
For IP Address Assignment, select Dynamic.
Click Apply.
End