Nat Alg Display Parameters - Nortel BSG8ew 1.0 Configuration Manual

196 SIP advanced configuration
Procedure steps
Step
1
2

NAT ALG display parameters

The following section describes the display parameters on the NAT ALG panel located at
Configuration
Variable definitions
The following table describes the variables and values for configuring NAT ALG information.
Variable
Private SIP Via Host
Private SIP Via UDP Port
Private SIP Via TLS Port
Private SIP Record Route
Private SIPS Record Route
Timer for Cleaning NAT
Binding
Public SIP Via Host
Public SIP Via UDP Port
Public SIP Via TLS Port
Public SIP Record Route
Public SIPS Record Route
NN47928-500 NN47928-500
Action
From the BSG navigation pane, select Configuration, SIP, FXO/FXS, Reboot
VoIP tab.
The VoIP Reboot dialog box appears.
Click Reboot VoIP to reboot VoIP.
, .
SIP, NAT ALG tab
Value
Displays the private IP on which SIP is running.
Displays the private UDP via port for SIP application.
Displays the private secured transport via port for SIP application.
Displays the private record-route IP for further SIP requests.
Displays the private secured SIP record-route IP for further SIPS requests.
Displays the NAT binding cleaning time (in minutes) after call tear-down.
Displays the public SIP through IP for WAN (Normal Mode) calls.
Displays the public SIP via UDP port.
Displays the public SIP secured transport via port.
Displays the BSG-SIP server's WAN link IP for Normal Mode calls.
Displays the BSG-SIPS server's WAN link IP for Normal Mode calls.