VLAN STP configuration
Spanning Tree Protocol (STP) is a link management protocol. It provides path redundancy while
preventing undesirable loops in the network created by multiple active paths between stations.
STP basic settings configuration parameters
The following section describes the configuration parameters for the STP basic settings located at
Configuration,
Variable definitions
The following table describes the variables and values for configuring the STP basic settings.
Variable
Enable RSTP
Enable MSTP
Disable both RSTP and MSTP Select this option to disable the RSTP and the MSTP.
Spanning Tree, Basic Settings tab
Value
Select this option button to enable RSTP.
Select this option button to enable MSTP.
VLAN advanced configuration
.
117
Configuration Guide