Nortel BSG8ew 1.0 Configuration Manual page 36

Business services gateway
Table of Contents

Advertisement

36
WAN configuration
9
10
Variable definitions
This table describes the variables that appear on the IP Configuration page.
Variable
PPP/MP Interface
IP Address Assignment
IP Address
Subnet Mask
Peer IP Address
Primary DNS Server
Secondary DNS Server
Peer DNS*
* The Peer DNS should only be configured if this BSG will act as the PPP server. In this case only,
when a PPP is established between this BSG and the other peer which obtains its IP address and
DNS dynamically, the peer DNS configured on this BSG will be assigned as the primary DNS on
the peer.
NN47928-500
NN47928-500
*In the Peer DNS field, type the DNS server IP address of the peer.
Set this field if IP Address Assignment is Manual.
Click Apply.
Value
The PPP/Multilink interface for which the
IP address is configured.
The IP address assignment mode.
Options:
Dynamic—obtains the IP address
dynamically from the peer. Manual
configuration is not required.
Manual—configure the IP address
manually. Manually configure the IP
Address, Subnet Mask, and Peer IP
Address fields.
The IP address of the PPP/Multilink
interface, if IP Address Assignment is
Manual.
The Subnet Mask for the IP address, if IP
Address Assignment is Manual.
The Peer IP address, if IP Address
Assignment is Manual.
The Primary DNS server IP address, if IP
Address Assignment is Manual.
The Secondary DNS server IP address, if
IP Address Assignment is Manual.
The Peer DNS server IP address, if IP
Address Assignment is Manual.
End

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bsg12ew 1.0Bsg12tw 1.0Bsg12aw 1.0

Table of Contents