Table of Contents
Advertisement
188
SIP advanced configuration
Variable definitions
The following table describes the variables and values for adding routing rules.
Variable
Mode of Dialplan
Condition
Value (for Condition)
Specify Number
Transformation
Type
Value (for Number
Transformation)
Position
Specify Routes
Route To
Priority
Advanced dial plan configuration parameters
The following section describes the parameters for the configuration of an advanced dial plan
located at
Configuration
NN47928-500
NN47928-500
Value
Select the dial plan mode. Select one of the following options:
•
Normal Mode Outgoing – creates a dial plan that is applicable in
Normal Mode.
•
Backup Mode – creates a dial plan that is applicable in Backup Mode.
Select the condition. Select one of the following options:
•
All - All conditions. Only specify All when the routing table is empty.
•
Non-numeric – condition is non-numeric string.
•
Number is = – condition is number string with trailing wild characters
such as ? and *.
•
Number Prefix = – condition is number string.
•
Number In-range = – condition is number string with the start and end
numbers given in the range.
•
Otherwise – must be specified as the condition in the last rule.
Type the value for the specified condition.
This option is disabled for some conditions.
Select this check box to enable number transformations.
Specifies the number transformations applicable to the condition. Select
one of the following type:
•
Insert digits - the transformation is an insertion of digits.
•
Drop digits - the transformation is a deletion of digits.
•
Replace - the transformation is a replacement of digits.
Type the value to insert, drop, or replace.
Type the position. This is the position where the insertion, deletion, or
replacement starts.
If you want to add another number transformation, click the Add button to
add the new number transformation to the viewing window.
Select this check box to enable routes.
Select the route.
The route values are Carrier Server and FXO1.
Type the route priority.
If you want to add another route, click the Add button to add the new route
to the viewing window.
,
SIP, Routing Rules, Advanced tab
.
Advertisement
Table of Contents
