20
WAN configuration
Figure 2 PPPoE WAN configuration procedures
Configuring the PPPoE WAN
Complete this procedure to configure the PPPoE WAN.
Procedure steps
Step
1
2
3
4
5
6
7
8
NN47928-500
NN47928-500
Action
From the BSG navigation pane, select Configuration, WAN, Ethernet.
The WAN Configuration pane appears.
From the Interface list, select the required interface.
From the Encapsulation Mode list, select PPPoE.
In the ISP Name field, type the Internet Service Provider name.
In the User Name field, type the PPPoE user name supplied by your ISP.
In the Password field, type the PPPoE password supplied by your ISP.
In the Host Name field, type the Host name.
Click Apply.
End