Table of Contents
Advertisement
182
SIP advanced configuration
SIP protocol configuration
This section provides configuration information for the SIP protocol.
SIP protocol configuration navigation
•
Header settings configuration parameters (page 182)
•
Transport settings configuration parameters (page 182)
•
Registrar settings configuration parameters (page 183)
•
SIP proxy server configuration parameters (page 184)
•
Timers configuration parameters (page 185)
Header settings configuration parameters
The following section describes the parameters for the configuration of header settings located at
Configuration
Variable definitions
The following table describes the variables and values for configuring header settings.
Variable
Organization Header
Server Header
Transport settings configuration parameters
The following section describes the parameters for the configuration of transport settings located
at
Configuration
Variable definitions
The following table describes the variables and values for configuring transport settings.
Variable
UDP
UDP Port
TCP
NN47928-500
NN47928-500
,
SIP, SIP Protocol, Headers tab
Value
Type the name of the organization header that SIP inserts into the
organization headers of SIP messages processed by the system.
The maximum number of characters is 199.
Specifies the name of the server header used in responses generated by
the SIP server.
The maximum number of characters is 199.
,
SIP, SIP Protocol, Transport
Value
Select this check box to configure UDP.
Type the port number used for UDP.
The value ranges from 1024 to 65535.
Select this check box to configure TCP.
.
tab.
Advertisement
Table of Contents
