Nortel BSG8ew 1.0 Configuration Manual page 44

44 Wireless network configuration
2
3
4
5
6
7
8
9
10
11
12
13
14
NN47928-500 NN47928-500
From the list of security settings, select the first default SSID.
The first SSID is enabled.
From the Authentication Type list, choose an authentication type.
From the Pre-Authentication Status list, select Enabled or Disabled.
This field is available only if Authentication Type is set to WPA, WPA2,
WPA-WPA2-Mixed, or Open1x.
From the Pre Shared Key Type list, select HEX or ASCII.
This field is available only if Authentication Type is set to WPA-PSK,
WPA2-PSK, or WPA-WPA2-PSK-Mixed.
In the Pre Shared Key field, type the pre-shared key value.
This field is available only if Authentication Type is set to WPA-PSK,
WPA2-PSK, or WPA-WPA2-PSK-Mixed.
From the Cipher Suite list, select the cipher used for data encryption.
This field is available only if Authentication Type is set to WPA, WPA2,
WPA-WPA2-Mixed, WPA-PSK, WPA2-PSK, or WPA-WPA2-PSK-Mixed.
In the PMK SA Lifetime field, type the maximum lifetime of a PMK in the PMK
cache.
This field is available only if Authentication Type is set to WPA, WPA2,
WPA-WPA2-Mixed, WPA-PSK, WPA2-PSK, WPA-WPA2-PSK-Mixed, or
Open1x.
Click Apply.
Select the Basic Settings tab.
The Basic WLAN Page pane appears.
From the Access Point list, select Enabled.
From the Country Code list, select the appropriate country.
From the Radio Mode list, select Mixed.
Click Apply.
End