Download  Print this page

Nortel BSG12aw Installation Manual

Business services gateway
Hide thumbs

Advertisement

Table of Contents
Installation
BSG8ew and BSG12ew/aw/tw 1.0
Business Services Gateway
Document Status:Standard
Document Number: NN47928-302
Document Version: 02.01
Date: May 2008

Advertisement

Table of Contents
loading

  Also See for Nortel BSG12aw

  Related Manuals for Nortel BSG12aw

  Summary of Contents for Nortel BSG12aw

  • Page 1 Installation BSG8ew and BSG12ew/aw/tw 1.0 Business Services Gateway Document Status:Standard Document Number: NN47928-302 Document Version: 02.01 Date: May 2008...
  • Page 2 Nortel Networks. Trademarks Nortel, the Nortel logo, and the Globemark are trademarks of Nortel Networks. Microsoft, MS, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation. All other trademarks and registered trademarks are the property of their respective owners.
  • Page 3: Table Of Contents

    Contents Contents ............3 How to Get Help .
  • Page 4 Contents Installation and basic configuration....... 33 Installation and basic configuration prerequisites ......33 Installation and basic configuration navigation .
  • Page 5: How To Get Help

    How to Get Help This section explains how to get help for Nortel products and services. Getting Help from the Nortel Web site The best way to get technical support for Nortel products is from the Nortel Technical Support Web site: http://www.nortel.com/support This site provides quick access to software, documentation, bulletins, and tools to address issues with Nortel products.
  • Page 6: Getting Help Through A Nortel Distributor Or Reseller

    How to Get Help Getting Help through a Nortel distributor or reseller If you purchased a service contract for your Nortel product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller. NN47928-302 NN47928-302...
  • Page 7: New In This Release

    New in this release The following sections detail the hardware features of the Business Services Gateway 8-port (BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw) with Ethernet WAN, ADSL WAN, and T1/E1 WAN: • “LEDs” on page 7 • “Power source” on page 7 •...
  • Page 8: Gige Lan Ports

    LEDs” on page WAN interfaces The BSG8ew and BSG12ew use a FE WAN interface. The BSG12tw uses a T1/E1 WAN interface. The BSG12aw uses a ADSL/ADSL2+ WAN interface. For more information, see “WAN port LEDs” on page Console port The console port is used for debugging purposes.
  • Page 9: Rack-Mount Shelf

    Rack-mount shelf You can mount the BSG8ew/12ew/aw/tw unit into a standard 19-inch equipment rack. For more information see “Rack-mount shelf kit” on page 20 equipment rack” on page Wall-mount bracket You can mount a BSG8ew into a wall-mount bracket. The BSG12ew/aw/tw cannot be mounted on the wall.
  • Page 10 New in this release NN47928-302 NN47928-302...
  • Page 11: Hardware Overview

    The three product variations offered for the BSG12ew/aw/tw are the BSG12ew with Ethernet WAN, BSG12aw with ADSL/ADSL2+WAN, and BSG12tw with T1/E1 WAN. These products are similar in design and differ only in their WAN interfaces. For more information, see “BSG12ew ports and connectors”...
  • Page 12: Field-Replaceable Units

    • BSG12ew unit with factory-installed WAN module filler plate cover and rear WiFi module • BSG12aw unit with factory-installed ADSL/ADSL2+ WAN module and rear WiFi module • BSG12tw unit with factory-installed WAN module filler plate cover and rear WiFi module...
  • Page 13 • 1 x Console Cable assembly FRU • two antennas The BSG12tw has the following FRUs: • BSG12ew/aw/tw power supply • country-specific power cords • 1 x WiFi module FRU • 1 x Console Cable assembly FRU • two antennas Hardware overview Installation...
  • Page 14: Product Description

    Hardware overview Product description For BSG8ew ports and connectors, see BSG8ew ports and connectors System LED Power LED LEDs diagram Reset button Power connector FE LAN ports Retention clip For BSG12tw ports and connectors, see NN47928-302 NN47928-302 BSG8ew ports and connectors (page GigE LAN port FXS ports (analog phones)
  • Page 15 BSG12tw ports and connectors PoE LEDs Link/Act LEDs FE LAN ports Hardware overview FXO port T1/E1WAN Console interface FXS ports port Installation...
  • Page 16 Hardware overview The BSG12ew has eleven FE LAN ports. For this unit, the twelfth port is used as the FE WAN interface. For BSG12ew ports and connectors, see BSG12ew ports and connectors PoE LEDs Link/Act LEDs FE LAN ports NN47928-302 NN47928-302 “BSG12ew ports and connectors”...
  • Page 17 For BSG12aw ports and connectors, see BSG12aw ports and connectors Link/Act and PoE LEDs FE LAN ports “BSG12aw ports and connectors” on page ADSL/ADSL2+ FXO port WAN interface Console port FXS ports Hardware overview Installation...
  • Page 18 On the BSG8ew, seven FE LAN ports are used to connect to the LAN. The BSG12tw and BSG12aw have twelve PoE enabled FE LAN ports to connect to the LAN. The BSG12ew has eleven PoE enabled FE LAN ports to connect to the LAN.
  • Page 19 For the BSG12, the FXS1 line maintains a connection to FXO during a power outage for emergency dialing. The BSG8ew and BSG12ew have one FE WAN interface. The BSG12aw has an ADSL/ADSL2+ WAN interface. The BSG12tw has two T1/E1 WAN interfaces. If the BSG8ew/12ew/aw/tw loses the primary WAN connection...
  • Page 20: Hardware

    Hardware overview Hardware The following BSG8ew/12ew/aw/tw hardware items simplify the setup and connection of the system: • “Rack-mount shelf kit” on page 20 • “Wall-mount bracket kit” on page 21 • “Single power supply holder” on page 22 • “Power supply” on page 22 Rack-mount shelf kit To mount a BSG8ew/12ew/aw/tw in a standard 19-inch equipment rack, you need a rack-mount shelf.
  • Page 21: Wall-Mount Bracket Kit

    If more than one BSG8ew/12ew/aw/tw unit is mounted on top of other units, only the unit lowest from bottom should have WiFi activated to prevent radio interference. The stacked antennas may have to be laterally adjusted. Wall-mount bracket kit Only the BSG8ew unit can be mounted on a wall. To mount a BSG8ew on the wall, you need a wall-mount bracket and a BSG8ew wall-mount kit.
  • Page 22: Single Power Supply Holder

    Hardware overview Single power supply holder The single power supply holder enables you to install one power supply unit on the wall next to your BSG8ew. The power supply holder keeps the power cables neatly organized. Power supply The BSG8ew is powered by a 60 W 12 V DC power supply with a power supply cord. The IEC320-C13 AC connector is available for all supported regions.
  • Page 23 BSG12ew/aw/tw power supply package 48 V DCS-type Power supply connector cord Hardware overview Power supply cable To wall outlet (NA shown) Installation...
  • Page 24 Hardware overview NN47928-302 NN47928-302...
  • Page 25: Led Functionality

    LED functionality The Business Services Gateway 8-port (BSG8ew) and Business Services Gateway 12-port (BSG12ew/aw/tw) have LEDs that indicate the status of the power, system, and the ports. The LEDs are • “Power and system LEDs” on page 25 • “LAN port LEDs” on page 26 •...
  • Page 26: Lan Port Leds

    LED functionality LAN port LEDs Each BSG unit has an LED that indicates link activity. Each BSG12ew/aw/tw unit has an additional LED that indicates whether power over internet (PoE) is enabled. BSG8ew Link Activity LEDs Each LAN port on the BSG8ew/12ew/aw/tw has one LED that indicates link activity. This LED turns on when an Ethernet cable is connected to the corresponding port.
  • Page 27: Bsg12Ew/Aw/Tw Link Activity And Poe Leds

    The following table shows the status of link activity for the BSG8ew WAN port LED: Link/Act LED Status Description Green The WAN/LAN port is Link Up at 100 Mb/s. Green Flashing The WAN/LAN port is sending or receiving data. Green The WAN/LAN port is not operating.
  • Page 28: Fxs And Fxo Ports Leds

    LED functionality BSG12ew/aw/tw POE LEDs The following table shows the LED colour and status for the BSG12 FE port LED: LED colour Status Solid green Link Up. No PoE. Flashing Link active. green No PoE. Solid amber Link up. PoE active. Flashing Link active.
  • Page 29: Wan Port Leds

    BSG8ew FXS and FXO port LEDs BSG12ew/aw/tw FXS and FXO port LEDs No FXO port Status Description Green Solid green Off-hook. Green Flashing Call ID generation and ringing. Green On-hook. WAN port LEDs The BSG8ew has two LEDs for the WAN port. For more information about the LEDs, see “BSG8ew FE WAN interface LEDs”...
  • Page 30 LED functionality BSG8ew FE WAN interface LEDs 10 Link/Activity status 100 Link/Activity status NN47928-302 NN47928-302...
  • Page 31 Link/Act LED Status Description Green The WAN port is operating at 100 Mb/s. Green Flashing The WAN port is sending or receiving data. Green The WAN port is not operating. Link/Act LED Status Description Amber The WAN port is operating at 10 Mb/s. Amber Flashing The WAN port is sending or receiving data.
  • Page 32 LED functionality I/O Port Mode VoIP1000 No LEDs (FXO/FXS) E1/T1 * 2 Bi-color LED Solid green Solid amber Blink amber Modem No LEDs (RJ11 rear) System Bi-color LED Solid LED1 green Solid amber NN47928-302 NN47928-302 Description The E1/T1 line is synchronized with the BSG. The E1/T1 line is not synchronized with the BSG.
  • Page 33: Installation And Basic Configuration

    Installation and basic configuration Install the Business Services Gateway 8-port (BSG8ew) or Business Services Gateway 12-port (BSG12ew/aw/tw) hardware and power supply and connect the cables for analog telephones and lines, the LAN, and the WAN. Installation and basic configuration prerequisites •...
  • Page 34: Installation And Basic Configuration Navigation

    Installation and basic configuration • You can connect the power supply to a power bar. The total length of the power cables from the power supply to the electrical outlet (including power bar) must not exceed 2 m (6.5 ft). You must use a power bar approved by an appropriate National Test Body, with a third-wire ground.
  • Page 35: Installation Options

    Installation options The following sections describe the various physical installation options for the Business Services Gateway 8-port (BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw). Installation options navigation • “Prerequisites to installation options” on page 35 • “Installing the BSG8ew/12ew/aw/tw on a desktop or shelf” on page 36 •...
  • Page 36 Installation options Installing the BSG8ew/12ew/aw/tw on a desktop or shelf Use this procedure to install a BSG8ew/12ew/aw/tw on a desktop or shelf. Prerequisites • Obtain the four supplied rubber feet for the BSG8ew/12ew/aw/tw. Procedure steps Step Action If installing the BSG8ew, insert the power supply retention clip. The BSG12ew/aw/tw uses a different power connector, which does not require a retention clip.
  • Page 37 Installing the BSG8ew on a wall Use this procedure to install a BSG8ew on a wall. The BSG12ew/aw/tw cannot be installed on a wall. Prerequisites • Obtain a Wall-Mount Assembly Kit (NTBU1225), which contains the door, the power supply holder, and the wall-mount bracket. •...
  • Page 38 Installation options Open the cable management door. Use two of the supplied screws to attach the wall-mount bracket to the wall through the cable trough. Use three of the supplied screws to attach the upper portion of the wall-mount bracket to the wall as shown in the following figure. Leave approximately 0.5 cm (0.25 in.) of the screw exposed.
  • Page 39 Slide the wall-mount lock fully to the right (unlock position) as shown in the following figure. Align the feet on the unit with the four holes in the wall-mount bracket. Press the unit against the wall-mount bracket and slide the unit down until it clicks in place.
  • Page 40 Installation options Slide the wall-mount lock to the left (lock position). Use the supplied screw to secure the wall-mount lock into position. Open the cable management door on the wall-mount bracket. You must replace the door on the standard small system wall-mount bracket. The replacement door has a notch to accommodate the BSG8ew antenna.
  • Page 41 Attach the antenna to the antenna adapter so that the antenna is parallel with BSG8ew. Place the power supply mounting bracket on the wall close to the BSG8ew. The power supply must be within 1.5 m (5 ft) of the BSG8ew and within 1.5 m (5 ft) of the AC power outlet.
  • Page 42 Installation options Place the BSG8ew/12ew/aw/tw on the rack so that the feet of the unit are in the depressions in the shelf. Move the unit forward until the feet touch the front side of the depressions, and then slide the unit back until the feet click in place on the slots in the depressions.
  • Page 43 Installing the BSG8ew/12ew/aw/tw on top of another unit Use this procedure to install a BSG8ew/12ew/aw/tw on top of a BCM50 or BES50 in a desktop or rack-mount installation. Procedure steps Step Action If installing the BSG8ew, insert the power supply retention clip. The BSG12ew/aw/tw uses a different power connector, which does not require a retention clip.
  • Page 44 Installation options NN47928-302 NN47928-302...
  • Page 45: Cable Connection

    Rotate the retention clip so the power outlet is open. Plug the power-supply cord into the BSG8ew. Rotate the retention clip so that it locks the power-supply cord in place. 17, and “BSG12tw ports and connectors” on page “BSG8ew ports and connectors” “BSG12aw ports and Installation...
  • Page 46: Cable Connection Navigation

    BSG8ew/12ew/aw/tw. Plug the other end of the Ethernet cable into your WAN edge device (for example, an external ADSL modem or cable modem). Plug the RJ11 telephone jack into the ADSL WAN module if you have a BSG12aw. NN47928-302 NN47928-302...
  • Page 47: Connecting The Bsg8Ew/12Ew/Aw/Tw To The Lan

    Connect the T1 connection. The PSTN provider brings the adapter box (RJ48<->RJ45) at the SMB premises to expose native RJ45 type connectors and connect to the BSG12tw WAN. Refer to the documentation for your WAN edge device for proper setup and configuration of the device.
  • Page 48: Connecting The Bsg8Ew/12Ew/Aw/Tw Pstn Central Office

    Cable connection Connecting the BSG8ew/12ew/aw/tw PSTN Central Office Use this procedure to connect the BSG8ew/12ew/aw/tw PSTN Central Office (CO). Prerequisites • Connect power to the BSG8ew/12ew/aw/tw. • Obtain a telephone cable with an RJ-11 modular jack. Procedure steps Step Action Plug the RJ-11 modular wall jack from PSTN into the FXO port of the BSG 8ew/ 12ew/aw/tw.
  • Page 49 Procedure steps Step Action Connect one end of the RS232 cable to the serial port of the laptop. Connect the other end of the RS232 cable to the console port of the BSG12ew/ aw/tw. Variable definitions Use the data in the following table to help you connect the console to the BSG12ew/aw/tw for debugging purposes.
  • Page 50 Cable connection NN47928-302 NN47928-302...
  • Page 51: System Verification

    System verification The following sections describe how to test the basic functionality of the Business Services Gateway 8-port (BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw). System verification navigation • “Verifying the physical system status” on page 51 Prerequisites for system verification •...
  • Page 52 System verification NN47928-302 NN47928-302...
  • Page 53: Power Supply Replacement

    Power supply replacement The following sections describe how to replace the power supply in a Business Services Gateway 8-port (BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw). Power supply replacement navigation • “Removing the power supply” on page 53 • “Connecting the new power supply”...
  • Page 54 Power supply replacement Procedure steps Step Action Remove the telephony and data networking lines from the While removing a BSG8ew, rotate the power supply retention clip to free the power supply cord. Remove the power supply cord from the Remove the power supply cord from the AC wall outlet. Remove the power supply from the table, rack-mount shelf, or wall-mount bracket.
  • Page 55: Adsl Wan Module Replacement

    Use this procedure to save the running configuration using the WebUI. Procedure steps Step Action From the BSG12aw logon page, log on using the user ID and password. From the left-hand navigation panel, select Administration, Configuration File, Save. Click Apply.
  • Page 56: Replacing The Adsl Wan Module

    Procedure steps Step Action Launch an SSH session. Log on to the BSG12aw using the user ID and password. At the prompt, enter the following command: write startup-config Variable definitions Use the data in the following table to use the fields in the logon page.
  • Page 57: Verifying The Adsl Wan Module Status

    Procedure steps Step Action Launch an SSH session. Log on to the BSG12aw using the user ID and password. At the prompt, enter the following command: show sub-system information dsl View the status. The system displays the following information if you installed the unit properly: DSL Info: IpAddress: 169.254.1.6...
  • Page 58 ADSL WAN module replacement Variable definitions Use the data in the following table to use the fields in the logon page. Variable User Name Password NN47928-302 NN47928-302 Value Specify the user name. The default logon name is nnadmin. Specify the password. The default password is PlsChgMe!.
  • Page 59: Wifi Module Replacement

    WiFi module replacement The following sections describe how to replace the WiFi module in a Business Services Gateway 12-port (BSG12ew/aw/tw). WiFi module replacement navigation • “Saving the running configuration to Flash using the WebUI” on page 59 • “Saving the running configuration to Flash using the CLI” on page 60 •...
  • Page 60 WiFi module replacement Variable definitions Use the data in the following table to use the fields in the logon page. Variable User Name Password Saving the running configuration to Flash using the CLI Use this procedure to save the running configuration using the CLI. Procedure steps Step Action...
  • Page 61 Procedure steps Step Action Unscrew and remove the two antennas. Use a Phillips screwdriver to remove the screws on either side of the WiFi module. You will feel the screws disengage when you have sufficiently loosened them. Gently remove the WiFi module from the faceplate. Slide the BSG12ew/aw/tw WiFi Replacement Module (NT5S21ZAE6) into the WiFi module slot.
  • Page 62 WiFi module replacement If the unit was previously configured, attempt to connect with the previous settings. If not previously configured, or if you cannot connect with your PC or laptop, navigate to the Quick Start Wizard and follow the wizard instructions on the GUI to reconfigure your settings.
  • Page 63: Basic Procedures

    Basic procedures The following sections describe basic procedures that you use to prepare the Business Services Gateway 8-port (BSG8ew) and Business Services Gateway 12-port (BSG12ew/aw/tw) for maintenance and restarting the BSG8ew or BSG12ew/aw/tw after maintenance. Basic procedures navigation • “Shutting down the BSG8ew/12ew/aw/tw” on page 63 •...
  • Page 64 Basic procedures Removing a rack-mounted BSG8ew/12ew/aw/tw Use this procedure to remove a rack-mounted BSG8ew/12ew/aw/tw. Procedure steps Step Action Remove all of the cables from the unit. To disconnect cables, see If the unit is mounted on top of another unit, slide that unit forward until it disengages from the clips on the lower unit.
  • Page 65: Disconnecting The Cables

    Remove all of the cables from the unit. To disconnect cables, see If a unit is mounted to the top of another unit, slide that unit forward until it disengages from the clips on the lower unit. Lift the unit off of the top of the lower unit.
  • Page 66 Basic procedures NN47928-302 NN47928-302...

This manual is also suitable for:

Bsg12ewBsg12twBsg8ew