Provisioning Users Configuration Parameters - Nortel BSG8ew 1.0 Configuration Manual

190 SIP advanced configuration

Provisioning users configuration parameters

The following section describes the parameters for the configuration of SIP users located at
Configuration
Variable definitions
The following table describes the variables and values for configuring subscriber information.
Variable
User Name
Domain
Alias
Display Name
Identity
Contacts
NN47928-500 NN47928-500
,
SIP, User Provisioning tab
Value
Type the subscriber name.
The maximum number of characters is 100.
Type the domain name of the subscriber.
The maximum number of characters is 32.
Type the alias name of the subscriber.
The maximum number of characters is 100. You can configure the alias
only when Allow Dynamic Subscriber Addition is enabled. You can set
Allow Dynamic Subscriber Addition in Registrar Configuration under SIP
Protocol.
In backup mode, SIP alias works for static subscribers only.
Type the display name for the subscriber.
The maximum number of characters is 100.
Displays the SIP identity of the subscriber.
This field appears after you add a user.
Displays the contact information of the subscriber.
This fields appears after you add a user.
.